Napatech

Napatech

Home

40 GbE Packet Capture & Replay Adapter

40 G Intelligent Network Adapter for Network Analysis
Adapter: NT40E2-1 PCIe

Product: NT40E2-1 Capture


The NT40E2-1 Capture Adapter is a high-performance 1 x 40 Gbps intelligent PCIe Gen2 network analysis adapter for Capture & Replay applications. The NT40E2-1 intelligent network adapter provides a single QSFP+ 40 GbE port and can be used for both packet capture and transmission.
 

Designed for Off-the-Shelf Standard Servers

The NT40E2-1 Capture Adapter is based on a low-profile hardware design and can be installed in almost any standard server.
 

High-Speed Packet Capture and Transmit

The NT40E2-1 is based on a PCIe Gen2 interface with 25 Gbps bus capacity. Nevertheless, 40 Gbps packet capture at full line-rate is possible in burst situations ensuring zero packet loss. Packet transmission up to the PCIe bus limit is possible allowing 2 x NT40E2-1 network adapters to be used in In-Line applications.
 

Intelligent flow identification, filtering and distribution

Intelligent features for frame decoding, flow identification, flow filtering and distribution to 32 CPU cores allow the NT40E2-1 to off-load and accelerate customer applications.
 

Plug-and-Play Capability

The NT40E2-1 supports the same API, feature set and capabilities as existing Napatech 10 Gbps network adapters allowing OEM customers to support 40G on a plug-and-play basis.
 

Precise Time Stamp

The NT40E2-1 Capture supports 4 ns time-stamping of both captured and transmitted frames. Timing can be synchronized to GPS, CDMA or IEEE 1588v2/PTP. An external SMA time synchronization connector is complemented by two internal time synchronization connectors allowing daisy-chain distribution of timing signals.
 

Capture and Replay Features

  • 40 Gbps packet capture and transmit with zero packet loss
  • Zero-copy DMA transfer to host memory with cache-hit optimization
  • Intelligent flow filtering and distribution to up to 32 CPU cores
  • Frame decoding of VLAN, ISL, MPLS, Ethernet, IPv4, IPv6, GTP, GRE, SCTP
  • Generation and verification of Ethernet, IP, UDP and TCP checksums

Product Features

1 x 40 Gbps Ethernet
  • QSFP+ SR4/LR4  interface

PCIe Gen2 
  • 8 lanes @ 5 GHz
  • Half length
  • Low profile
  • Exchangeable frontbracket

High Performance
  • 40 Gbps burst capture for
    all frame sizes
  • Zero packet loss
  • Low CPU load


Onboard Memory
  • 1 GB

Key Features
  • 32 CPU core distribution
  • 4 ns time stamp
  • Frame classification
  • Deduplication
  • Programmable HW filters
  • Zero-copy to host
  • External time sync
  • LibPCAP and WinPCAP

Operating Systems
  • Linux, FreeBSD, Windows
© Napatech A/S, all rights reserved. Terms & Conditions